The Hard Wired 24VDC Doorbell Horn/Strobe is an audible/visual signaling device that may be used in a variety of system configurations including doorbell applications. It is included with and can be added to the Hard-Wired 24VDC Audio/Visual Doorbell System Kit . (maximum 5 horn/strobes per system)
** NOTE: Contact us for options if you need more than 5 horn/strobes for your system. **
Our (optional) doorbell timer relay can adjust the length of the strobe flash of your hard-wired doorbell system from 3 to 60 seconds.
• Nominal voltage 24 VDC • Field selectable candela options of 15, 30, 60, 75, and 110 • Unit Dimensions: 5” (12.7 cm) high x 4.5” (11.43 cm) wide x 2.5” (6.35 cm) deep • Super-Slide® Bracket - Ease of Supervision Testing • Checkmate®- Instant Voltage Verification • Prewire entire system, install mounting bracket, then install signals • Input terminals accept 12 to 18 AWG • Switch selection for high or low dBA • Switch for 2400 Hz, mechanical, chime and whoop tones • Switch for continuous or temporal 3 (not available on whoop tone) • Silence audible while visual appliance will remain flashing • Tamperproof re-entrant grill • Surface mount
• ANSI/UL 464 and ANSI/UL 1638 Listed • CAN/ULC S525 and/or CAN/ULC S526 Listed